Lincoln Flextec 500X/ Flex Feed 84 Heavy Duty Ready-Pak

Lincoln Flextec 500X/ Flex Feed 84 Heavy Duty Ready-Pak

The Flextex 500X welding power source features Built-in CrossLinc® technology, which means that the Flextec 500X communicates with an OPTIONAL CrossLinc remote or Lincoln X Series voltage-sensing wire feeder directly through your welding leads. Full remote amperage and voltage control is achieved without the use of a separate remote-control cable. Standard voltage sensing wire feeders may also be used, but CrossLinc remote control functionality will be disabled.  For in-shop welding applications, the Flextec 500X also supports Lincoln 14-pin (analog) and 5-pin (digital) wire feeders through amphenol receptacles on the front panel.

The Flextec 500X is built to be a rugged performer on the harshest job sites. It is rated IP23 for welding in outdoor weather conditions. The 500X also comes with Lincoln’s Desert Duty® certification, meaning it can keep welding in temperatures up to 131 degrees F. Heavy duty alloy carrying handles, powder-coated aluminum case and shock absorbing rubber feet make this an impact resistant power source that will stand up to abuse.

The Flextec 500X operates on 380-575 volt, three-phase input power and comes with Lincoln’s three-year warranty.

Processes

• MIG (GMAW)
• Flux-Cored (FCAW)
• DC TIG (GTAW)
• Stick (SMAW)
• Air-Carbon Arc Gouging (CAC-A)

  Applications
  Fabrication
  Construction
  Shipbuilding
  Structural
  Pipe

  

  Features

• Heavy Duty Flex Feed® 84 Wire Feeder
  Feeds solid welding wire up to 3/32 in. diameter.
  4-Roll Maxtrac® wire drive system.
• Multi-Process Power Source for all Your Welding Needs
  Optimized stick welding for both cellulosic and low hydrogen electrodes.
  Compatible with both CrossLinc® and standard voltage sensing feeders feeders for GMAW and FCAW.
  Touch-Start TIG® for reducing contamination during starts without high frequency.
• Field Proven Ruggedness and Durability
  Engineered for outdoor use and harsh environments.
  IP23 rated for use in outdoor weather conditions.
  Desert Duty rated for operation at temperatures up to 55° C (131° F).
  Trayed and potted PC boards to help withstand welding dust and humidity.
  Smart fans run at variable speeds to keep internal machine components cool.
  Tough alloy handles for lifting and impact protection.
  Lightweight aluminum powder painted case for rust protection.
  Shock Absorbing Rubber Feet for impact protection
• Supports 14-pin (analog) and 5-pin (ArcLink) wire feeders
  As well as CrossLinc and Across-the-Arc
• CrossLinc® with True Voltage Technology™
  CrossLinc® allows for amperage and voltage control at the welding arc to improve control of your operation.
  No need for an additional control cable communication occurs directly over the weld cables.
  True Voltage Technology™ compensates for voltage drop across the welding circuit.
  TVT™ will measure the voltage drop and adjust the power source to compensate for the difference between the desired voltage and actual voltage at the weld.
  

PLEASE NOTE: This is a DC welder ONLY. It CANNOT TIG weld aluminum.

Comes complete with

• Flextec® 500X Multi-Process Welder
• Power Feed® 84 Wire Feeder, Single-Spool Model, Heavy Duty K3328-13
• Magnum® PRO Curve™ 400 Welding Gun K2952-2-10-45
• Cart for Inverter and Wire Feeder K3059-4
• Flextec® 500X Locking Foot Kit K3056-2
• 8 ft. Arclink® control cable K1543-8
• Work Lead – Lug & GC500 Ground Clamp (4/0, 600A, 60%) – 15 ft (15.3m) K2149-1
• Drive Roll Kit .035, .045 (0.9, 1.2 mm) Solid Wire KP1505-1
• Weld Power Cable – Lug to Lug (3/0, 600A, 60%) – 10 ft (3 m) K1842-10
• Model 355-2Ar-58010 Flowmeter Regulator Shielding Gas Kit 3100211
• Fully Assembled