Miller Maxstar 161 STL TIG/Stick Package w/Remote Control 907710002

Miller Maxstar 161 STL TIG/Stick Package w/Remote Control 907710002

The Maxstar 161 STL also offers superior stick arc performance, even when using E6010. It has Miller’s Auto-Line™ technology that automatically adjusts for input voltages ranging from 120 volts to 240 volts without manual linking.

The Maxstar 161 STL comes with Miller’s True Blue® 3 year warranty.

Process

• Lift-Arc™ DC TIG (GTAW)
• Stick (SMAW)

  Applications
  Process pipe
  Dairy industry
  Food/beverage industry
  Restaurant/kitchen repair
  Experimental aircraft
  Shipboard installation/repair
  Maintenance repair

  Features
  

• Auto-Line™ – Allows for any input voltage hookup (120 – 240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
• Digital meter for more precise control when presetting or monitoring welding amperage.
• Lift-Arc™ provides TIG arc initiation without the use of high frequency.
• Full function remote control for precise amperage control for critical welds on thin materials (6-pin RCCS-6M fingertip control)
• Built-in gas solenoid eliminates the need for a bulky torch with a gas valve.
• Portable in the shop or at the job site – at 13.2 lb the shoulder strap allows the end user to easily move from location to location.
• Fan-On-Demand™ – power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through the machine.
• Thermal overload protection – helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.
• Single amperage range – allows operator to accurately set amperage on both 120 or 240 volt primary power.
• Hot Start™ adaptive control – provides positive arc starts without sticking.
• Low OCV stick is a simple design that reduces the open circuit voltage to 12 – 16 volts when the welding power source is not in use. This circuit design is now built into the Maxstar 161 S eliminating the need for add-on voltage reducers.
• Power factor corrected (PFC) – for optimum performance especially on 120 volts – reduces nuisance breaker tripping.
• Stick-Stuck detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.
• Superior stick arc performance even on the difficult-to-run electrodes like E6010.

  

  NOTE: This is a DC welder ONLY. It CANNOT weld aluminum.

  

  Comes complete with

• Maxstar 161 STL TIG/Stick welder
• 6.5 ft. (2 m) 120-volt and 240-volt power cords
• X-CASE™provides protection in transport and storage
• RCCS-6M remote fingertip control (195184)
• Weldcraft™ A-150 (WP-17) 12.5 ft. (3.8 m) TIG torch with connector
• Stick electrode holder with 13 ft. (4 m) cable and 25 mm
• Dinse-style connector
• Work clamp with 10 ft. (3 m) cable and 25 mm Dinse-style connector
• Flow gauge regulator with gas hose
• AK2C accessory kit with short back cap, nozzles, collets, collet bodies, and 2% ceriated tungsten electrodes (.040, 1/16, and 3/32 in.)
• Handle/shoulder strap
• FREE Miller® Classic VSi Black auto-darkening welding hood