Miller Millermatic 142 MIG Welder with Cart
Manual MIG welding control is also available for those welders who wish to fine tune their welding arc. Manual welding mode must also be used when MIG welding aluminum, stainless steel or for flux-cored welding. The parameter door chart lists voltage and wire feed speed settings options.
The #301239 running gear and cylinder rack is made from heavy-duty construction. It has eight inch rubber rear wheels for smooth running over most shop surfaces. It comes complete with front handles, cable holders and plastic consumables storage box. The cylinder rack will hold a single gas cylinder up to 7 inches in diameter and 65 pounds in weight.
Processes
- MIG (GMAW)
- Flux Cored (FCAW) (gas and self-shielded)
Applications
- Light Industrial Applications
- Light Fabrication
- Maintenance and Repair
- Auto Body
- Farm/Home
Features:
- Auto-Set™ automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters.
Set the wire diameter, a blue light shows Auto-Set is activated
Dial in the thickness of what you are welding
Start welding with the exact parameters you need! - Quick Select™ drive roll makes setup quicker by offering three grooves, two for different size solid wire and a third for flux-cored welding wire.
- Auto Spoolgun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
- Smooth-Start™ provides a smooth, spatter-free start. It is the best-starting machine in the small MIG machine category.
- Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools.
- Fan-On-Demand™ cooling system only operates when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.
- Uses 4 inch or 8 inch (102 or 203 mm) spools and can be set up to weld with .024 to .030 inch (0.6 to 0.8 mm) solid wire and .030 to .035 inch (0.8 to 0.9 mm) flux-cored wire.
Specs
Comes complete with:
- Millermatic® 142 MIG Welding Power source
- Running gear with single cylinder rack
- 6.5-ft. (2 m) power cord with plug
- 10-ft. (3 m), 100 amp MDX™-100 MIG gun and cable assembly
- 10-ft. (3 m) work cable with clamp
- Argon – Argon/CO2 mix flow gauge regulator with gas hose
- Hobart® spool of .030-in. (0.8 mm) solid wire
- Two contact tips for .030-in. (0.8 mm) wire
- Quick Select® drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
- Material thickness gauge #229 895
- Hook and loop cord wraps
Reviews
There are no reviews yet.