Miller Spoolmate 100 MIG Spoolgun 300371

Miller Spoolmate 100 MIG Spoolgun 300371

Spoolmate™ 100 Series spool guns provide 12 ft (3.7 m) of cable reach and accessibility for smooth feeding of aluminum wire.

Processes

• MIG (GMAW) for Aluminum Wire Size .030 to .035 in (0.8 to 0.9 mm)
• MIG (GMAW) for Mild and Stainless Steel Wire Size .023 to .035 in (0.6 to 0.9 mm)

  Home Hobbyist Applications

• Aluminum Fabrication
• Home Maintenance and Repair
• Auto and Marine Repair

  Features

• Reliable and economical direct connect for Millermatic® 140 and 180 MIG welders after serial #LH210051N, Millermatic® 211 w/Auto-Set, Millermatic® Passport® Plus and Renegade™ 180 Spoolmate™ 100 Series spool guns provide 12 ft (3.7 m) of cable reach and accessibility for smooth feeding of aluminum wire.
• Recessed contact tip for easier welding and prevention of burn back issues.
• Dual V-knurled drive rolls for consistent feeding.
• Adjustable drive roll tension for feeding different types of wire.
• Adjustable pressure lever for easy loading and unloading of wire.
• Heavy-duty drive motor and cast aluminum gearbox.
• 12 ft (3.7 m) cable with heavy-duty strain relief and direct connection.
• Clear spool cover allows the user to see the amount of wire left before it runs out.
• Convenient carrying case holds gun and cable, extra contact tips, nozzle, and wire (wire not included).

  

  NOTE: The Spoolmate 100 is intended for Home/Hobbyist use ONLY – not production welding. Cyberweld does not recommend the Spoolmate™ 100 for aluminum MIG wires larger than .030 diameter when using a Millermatic® 140 MIG welder.

  Comes Complete With

• 12 ft. (3.7m) cable
• Custom carrying case
• Extra contact tips and nozzle
• Two FREE 1 lb. spools of Hobart® 4043 .035 diameter aluminum MIG welding wire.

Get two FREE 1 lb. spools of Hobart® MaxalMig® 4043 .035 diameter aluminum MIG welding wire with the purchase of this Spoolmate™ 100 spool gun. While supplies last. (No substitutions allowed.)

Hobart® ER4043 .035 Aluminum MIG Welding Wire – 1# Spool 404303504

1 lb. Spool – Genuine Hobart® ER4043 .030 diameter Aluminum MIG Welding Wire is a general purpose wire that is well-suited for welding 6XXX series aluminum. It is classified as AWS A5.10 ER4043 and is an all-position solid MIG wire with a low melting temperature and excellent corrosion resistance.

Applications
Welding 6xxx alloys
Automotive/motorcycle frames
Sports products – scooters/bicycles
General repair and maintenance

Features

• Moderate strength (28 ksi typical)
• Low melting temperature/high fluidity
• Low welding smut and discoloration
• Low ductility, formability, and lower toughness
• Moderate electrical conductivity and thermal conductivity
• Excellent corrosion resistance
• Low shrinkage rate/reduced distortion
• Low hot cracking sensitivity in most applications

  Shielding Gas:
  Argon 100%
  Argon/Helium mixes for 1 inch + thick plate