$17,983.00Original price was: $17,983.00.$11,688.00Current price is: $11,688.00.
The Miller® AlumaFeed™ 350 MIGRunner™ w/XR-Aluma Pro™ 25 ft. Air-Cooled Push-Pull Gun is a complete 425 amp MIG welding package that is specifically designed for pulsed MIG welding of aluminum. The XR-AlumaFeed™ Suitcase® wire feeder and AlumaPower™ 350 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$17,702.00Original price was: $17,702.00.$11,506.00Current price is: $11,506.00.
The Miller® AlumaFeed™ 350 MIGRunner™ w/XR™- Pistol 30 ft. Air-Cooled Push-Pull Gun is a complete 425 amp MIG welding package that is specifically designed for pulsed MIG welding of aluminum. The XR-AlumaFeed™ Suitecase® wire feeder and AlumaPower™ 350 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$21,242.00Original price was: $21,242.00.$13,807.00Current price is: $13,807.00.
The Miller® AlumaFeed™ 350 MIGRunner™ w/XR™-Pistol 25 ft. Water-Cooled Push-Pull Gun is a complete 425 amp MIG welding package that is specifically designed for pulsed MIG welding of aluminum. The XR-AlumaFeed™ Suitcase® wire feeder and AlumaPower™ 350 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY). Coolmate™ 3 water cooler included in MIGRunner package.
$20,650.00Original price was: $20,650.00.$13,422.00Current price is: $13,422.00.
The Miller® AlumaFeed™ 350 MIGRunner™ w/XR™-Aluma-Pro™ 25 ft. Water-Cooled Push-Pull Gun is a complete 425 amp MIG welding package that is specifically designed for pulsed MIG welding of aluminum. The XR-AlumaFeed™ Suitcase® wire feeder and AlumaPower™ 350 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY). Coolmate™ 3 water cooler included in MIGRunner package.
$15,480.00Original price was: $15,480.00.$10,062.00Current price is: $10,062.00.
The Miller® AlumaFeed™ 350 with XR-Aluma Pro™ 25 ft. Air-Cooled Push-Pull Gun is a 425 amp MIG welding package that is specifically designed for pulsed MIG welding of aluminum. The XR-AlumaFeed™ Suitcase® wire feeder and AlumaPower™ 350 MPa produce aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$15,250.00Original price was: $15,250.00.$9,912.00Current price is: $9,912.00.
The Miller® AlumaFeed™ 350 with XR™-Pistol 25 ft. Air-Cooled Push-Pull Gun is a 425 amp MIG welding package that is specifically designed for pulsed MIG welding of aluminum. The XR-AlumaFeed™ Suitcase® wire feeder and AlumaPower™ 350 MPa produce aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$7,059.00Original price was: $7,059.00.$4,588.00Current price is: $4,588.00.
The Miller® AlumaPower™ 350 MPa is a 425 amp MIG welder that is specifically designed for pulsed MIG welding of aluminum. When paired with the OPTIONAL XR-AlumaFeed™ wire feeder, the 350 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$7,756.00Original price was: $7,756.00.$5,041.00Current price is: $5,041.00.
The Miller® AlumaPower™ 350 MPa with aux power is a 425 amp MIG welder that is specifically designed for pulsed MIG welding of aluminum. When paired with the OPTIONAL XR-AlumaFeed™ wire feeder, the 350 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$7,634.00Original price was: $7,634.00.$4,962.00Current price is: $4,962.00.
The Miller® AlumaPower™ 450 MPa is a 600 amp, 3-Phase MIG welder that is specifically designed for pulsed MIG welding of aluminum. When paired with the OPTIONAL XR-AlumaFeed™ wire feeder, the 450 MPa produces aluminum MIG welds that rival the quality and appearance of TIG welds. Built-in MIG and pulsed MIG welding programs allow for easy set up of weld parameters for a variety of welding wires. (Built-in Pulsed MIG programs are available for aluminum MIG wire ONLY)
$3,980.00Original price was: $3,980.00.$2,587.00Current price is: $2,587.00.
The Miller® SuitCase® ArcReach® 12 Wire Feeder ONLY is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable. The secret to this technology is built-in circuitry in both the 12VS ArcReach feeder and Miller ArcReach welder that passes remote control signals through the welding leads, eliminating the need for costly remote control cables. ArcReach remote control distance is limited only by the length of your welding cable leads. ArcReach allows your MIG or Flux-Cored welding operation to take place further away from the welding power source and reduces downtime and costs by giving the operator full remote voltage AND amperage control capabilities at the site of the weld without using expensive remote control cables. The Suitcase X-TREME 12VS ArcReach MUST be paired with a Miller ArcReach welder to get the full benefits of this feature.
$3,770.00Original price was: $3,770.00.$2,450.00Current price is: $2,450.00.
The Miller® SuitCase® ArcReach® 8 Wire Feeder with Bernard® S-Gun™ is a voltage sensing MIG wire feeder that has full remote voltage and amperage control without the use of a remote control cable. The secret to this technology is built-in circuitry in both the 8VS ArcReach feeder and Miller ArcReach welder that passes remote control signals through the welding leads, eliminating the need for costly remote control cables. ArcReach remote control distance is limited only by the length of your welding cable leads. ArcReach allows your MIG or Flux-Cored welding operation to take place further away from the welding power source and reduces downtime and costs by giving the operator full remote voltage AND amperage control capabilities at the site of the weld without using expensive remote control cables. The Suitcase X-TREME 8VS ArcReach MUST be paired with a Miller ArcReach welder to get the full benefits of this feature.
$4,381.00Original price was: $4,381.00.$2,847.00Current price is: $2,847.00.
The Miller® CST™ 282 with Dinse (International) receptacles is a 280 amp portable Stick/TIG welder designed for the construction industry. Weighing less than 35 pounds, the CST 282 can go anywhere on the jobsite. Its 280 amps of output is ideal for stick electrodes up to 3/16 inch and for DC TIG welding of pipe and plate. Auto-Line™ technology allows the 282 to operate on single or 3-phase, 230 to 575 volt input power with no manual linking required. It has superior stick welding arc characteristics and has specific settings to optimize performance when using XX10 and XX18 electrodes.
$4,381.00Original price was: $4,381.00.$2,847.00Current price is: $2,847.00.
The Miller® CST™ 282 with Tweco® receptacles is a 280 amp portable Stick/TIG welder designed for the construction industry. Weighing less than 35 pounds, the CST 282 can go anywhere on the jobsite. Its 280 amps of output is ideal for stick electrodes up to 3/16 inch and for DC TIG welding of pipe and plate. Auto-Line™ technology allows the 282 to operate on single or 3-phase, 230 to 575 volt input power with no manual linking required. It has superior stick welding arc characteristics and has specific settings to optimize performance when using XX10 and XX18 electrodes.
$13,950.00Original price was: $13,950.00.$9,067.00Current price is: $9,067.00.
The Miller® Deltaweld® 350 MIGRunner with Dual Inellx™ Feeder is a complete 400 amp MIG welding system that operates on 3 phase input power. The advanced technology of both the Deltaweld 350 welder and the Intellx feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a more forgiving arc, the Deltaweld 350 increases productivity by reducing training time.
$18,237.00Original price was: $18,237.00.$11,854.00Current price is: $11,854.00.
The Miller® Deltaweld® 350 MIGRunner with Inellx™ Elite Feeder and XR-Aluma-Pro™ Plus push-pull gun is a complete 400 amp MIG welding system that comes standard with pulsed MIG capabilities and expanded welding programs. The advanced technology of both the Deltaweld 350 welder and the Intellx Elite feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a 28% wider operating window and more forgiving arc, the Deltaweld 350 increases productivity by reducing weld clean up and training time.
$22,080.00Original price was: $22,080.00.$14,352.00Current price is: $14,352.00.
The Miller® Deltaweld® 350 MIGRunner with Inellx™ Elite Dual Feeder and XR-Aluma-Pro™ Plus push-pull gun is a complete 400 amp MIG welding system that comes standard with pulsed MIG capabilities and expanded welding programs. The advanced technology of both the Deltaweld 350 welder and the Intellx Elite feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a 28% wider operating window and more forgiving arc, the Deltaweld 350 increases productivity by reducing weld clean up and training time.
$18,246.00Original price was: $18,246.00.$11,859.00Current price is: $11,859.00.
The Miller® Deltaweld® 350 MIGRunner with Inellx™ Elite Dual Feeder is a complete 400 amp MIG welding system that comes standard with pulsed MIG capabilities and expanded welding programs. The advanced technology of both the Deltaweld 350 welder and the Intellx Elite feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a 28% wider operating window and more forgiving arc, the Deltaweld 350 increases productivity by reducing weld clean up and training time.
$14,375.00Original price was: $14,375.00.$9,343.00Current price is: $9,343.00.
The Miller® Deltaweld® 350 MIGRunner with Inellx™ Elite Feeder is a complete 400 amp MIG welding system that comes standard with pulsed MIG capabilities and expanded welding programs. The advanced technology of both the Deltaweld 350 welder and the Intellx Elite feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a 28% wider operating window and more forgiving arc, the Deltaweld 350 increases productivity by reducing weld clean up and training time.
$10,758.00Original price was: $10,758.00.$6,992.00Current price is: $6,992.00.
The Miller® Deltaweld® 350 MIGRunner with Inellx™ Feeder is a complete 400 amp MIG welding system that operates on 3 phase input power. The advanced technology of both the Deltaweld 350 welder and the Intellx feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a more forgiving arc, the Deltaweld 350 increases productivity by reducing training time.
$14,913.00Original price was: $14,913.00.$9,693.00Current price is: $9,693.00.
The Miller® Deltaweld® 350 MIGRunner with Dual Inellx™ Pro Feeder is a complete 400 amp MIG welding system that comes standard with pulsed MIG capabilities. The advanced technology of both the Deltaweld 350 welder and the Intellx Pro feeder means that professional, superior quality welds are consistently produced regardless of the skill level of the operator. With a 28% wider operating window and more forgiving arc, the Deltaweld 350 increases productivity by reducing weld clean up and training time.
